While driving

Operating the Park Pilot

~1min read
Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The Park Pilot uses ultrasonic sensors to determine the distance from the rear bumper to an obstacle. There are 3 ultrasonic sensors on the rear bumper ⇒ Exterior views.

Switching the Park Pilot on and off
Function Action with the ignition switched on
Switching the Park Pilot on automatically: Engage reverse gear or select selector lever position R.
Switching the display off manually: If necessary, tap the screen of the portable infotainment system (supplied by Volkswagen).
Switching the Park Pilot off automatically: After disengaging reverse gear or moving the selector lever out of position R.
Special features of the Park Pilot
  • In some cases, the Park Pilot detects water and ice on the ultrasonic sensors as an obstacle.
  • If the distance remains the same, the audible signal tone becomes quieter after a few seconds. When the continuous tone sounds, the volume remains constant.
  • As soon as the vehicle moves away from the obstacle, the interval tone switches off automatically. When you approach again, the interval tone switches on automatically.
  • A Volkswagen Partner can adjust the volume of the audible signal tones.

A malfunction of the Park Pilot is signaled by a continuous tone lasting about 3 seconds
when switching on for the first time. Have the Park Pilot checked by a qualified workshop immediately.