While driving

Warning and indicator lights

~1min read
Read and observe the introductory information
and safety warnings first
⇒Introduction
to the topic

The City emergency braking function is switched on each time the ignition is switched on. There is no separate indication.

The indicator light illuminates if the City emergency braking function is switched off, is not working or if there is a fault in the system.



lights up Possible cause ⇒Remedy
City emergency braking function was switched off using the button
switched on ⇒ Fig. 108 .
The indicator light goes out automatically after approx. 5 seconds.




flashes Possible cause ⇒Remedy
fast: City emergency braking function is braking automatically or has braked automatically. The indicator light goes out automatically.
slow: City emergency braking function is currently not available. When the vehicle is stationary, switch off the engine and restart it. If necessary, carry out a visual check of the laser sensor (dirt, ice, roof load protruding far forward) ⇒.
If the function remains unavailable, have the system checked at a specialist workshop.
within the operating range of approx. 5 – 30 km/h: City emergency braking function was switched off using the button
⇒ Fig. 108 .
City emergency braking function switched on using the button
⇒ Fig. 108 .

When the ignition is switched on, some warning and indicator lamps light up briefly to check their function. They go out after a few seconds.

Warning
Ignoring illuminated warning lights can lead to accidents and serious injuries.
  • Never ignore warning lights that are illuminated.
Note
Ignoring illuminated indicator lights can lead to damage to the vehicle.