While driving

Economical driving style

~2min read
Read and observe the introductory information
and safety warnings first
⇒Introduction
on Shifting up early

As a general rule, the higher gear is always the more economical gear. As a rule of thumb for most vehicles: at a speed of about 30 km/h, shift to 3rd gear; at about 40 km/h, shift to 4th gear; and at about 50 km/h, shift to 5th gear.

Skipping gears when shifting up also saves fuel, if the traffic and driving situation allows it.

Do not rev the engine up to high speeds before shifting. Use 1st gear only for pulling away and shift promptly into 2nd gear. On vehicles with automatic transmission, avoid kickdown.

Vehicles with a gear shift indicator support fuel-efficient driving by showing the optimal time to shift gears.

Coasting

When the foot is taken off the accelerator pedal, the fuel supply to the engine is interrupted and consumption is reduced.

Therefore, for example when approaching a red traffic light, let the vehicle roll without accelerator. Only press the clutch pedal to disengage the clutch when the vehicle becomes too slow or the coasting distance is longer. The engine then continues to run at idle speed.

In situations where a longer stationary period is expected, switch off the engine actively, e.g. before a railway crossing. On vehicles with the Start-Stop system switched on, the engine switches off automatically when the vehicle is stationary.

Driving ahead and going with the flow of traffic

Frequent acceleration and braking increase fuel consumption considerably. By driving ahead with a sufficiently large distance to the vehicle in front, speed fluctuations can be evened out simply by easing off the accelerator. Active acceleration and braking are then not necessarily required.

Driving calmly and smoothly

At high driving speeds, driving resistance rises sharply, particularly due to air resistance. Consistency is more important than speed: the more evenly you drive, the lower the fuel consumption.

On motorway journeys, the selected driving speed has a significant influence on fuel consumption. An adapted and constant driving speed can reduce the vehicle's fuel consumption.

A constant driving style is supported by the cruise control system (CCS) ⇒ Cruise control system (CCS).

Using comfort features in moderation

Comfort in the vehicle is good and important, but you should use it with an environmentally conscious approach.

The following examples can reduce fuel consumption and thus increase the driving range:

  • Air conditioning cooling: If the air conditioning system has to produce a very large temperature difference, it requires a lot of energy, which is generated by the engine. For this reason, the temperature difference inside the vehicle should not be excessively large compared with the outside temperature. If necessary, ventilate the vehicle before starting and then drive a short distance with the windows open. Only then switch on the air conditioning with the windows closed.
  • At high speeds, keep the windows closed. Open windows increase fuel consumption.
  • Switch off the seat heating once it has fulfilled its purpose.
  • Switch off the rear window heating once the window is free of fog and ice.
Other factors that increase fuel consumption (examples):
  • Faulty engine management.
  • Driving in mountains.