Volvo XC90 Quiz
Wheels and Tires

Wheel bolts

In this manual: Wheels and Tires
Owner's Information — 7Your Volvo — 3Creating and registering a Volvo ID — 16Safety — 29Displays and Controls — 52Illumination — 36Seats and Steering Wheel — 19Climate Control — 45Keys, Locks and Alarm — 31Driver Support — 113Starting and driving — 70Audio, media and internet — 27Media Player — 46Wheels and Tires — 28Loading, storage and passenger compartment — 16Maintenance and Service — 59Specifications — 12
~1min read
050100150200250140103N·mlb·ft
Tightening torque found on this page

The wheel bolts hold the wheel in place on the wheel hub.

Only use rims that have been tested and approved by Volvo and are included in Volvo's original product range.

Use a torque wrench to check that the wheel bolts are tightened correctly.

Do not grease the wheel bolt threads.

Wheel bolt lock kit*

To loosen or tighten the locking wheel bolt, turn the key in the locking bolt until it fully engages in the code grooves. When removing a wheel, always start with the locking wheel bolt. When installing a wheel, finish with the locking bolt.

When the wheel bolt key is not being used, stow it in its designated location in the foam block under the cargo compartment floor. This is important to remember so that the tool is available if the vehicle is taken to a workshop. If you lose the key, contact your Volvo retailer.

* Option/accessory.

Test yourself

A quick Volvo XC90 quiz: every answer comes with an explanation and a link to the manual page.