Troubleshooting method

The engine operation is not normal and the engine trouble warning light comes on.

1. Check:

• Fault code number

a. Check the fault code number displayed on the FI diagnostic tool.

b. Identify the faulty system with the fault code.

Refer to "Self-Diagnostic Function table".

c. Identify the probable cause of the malfunction.

Refer to "Diagnostic code table".

2. Check and repair the probable cause of the malfunction.

3. Perform fuel injection system reinstatement action.

Refer to "Reinstatement method" of table in "TROUBLESHOOTING DETAILS" on page 8-41.

4. Set the main switch to "OFF" and back to "ON", and then check that no fault code number is displayed.

NOTE:

If other fault codes are displayed, repeat steps (1) to (4) until no fault code number is displayed.

5. Erase the malfunction history in the diagnostic mode. Refer to "Sensor operation table (Diagnostic code No. 62)".

NOTE:

Setting the main switch to "OFF" will not erase the malfunction history.

The engine operation is not normal but the engine trouble warning light does not come on.

1. Check the operation of the following sensors and actuators in the diagnostic mode. Refer to "Sensor operation table" and "Actuator operation table".

If a malfunction is detected in the sensors or actuators, repair or replace all faulty parts.

If no malfunction is detected in the sensors and actuators, check and repair the inner parts of the engine.