Electrical System

Component Location Overview - Windshield Wiper System

~3min read
010203040502216N·mlb·ft
Tightening torque found on this page
Component Location Overview - Windshield Wiper System

1 - Spray Nozzle for Night Vision System Camera -R212-

  • Overview. Refer to → Chapter "Overview - Headlamp Washer System".

2 - Headlamp Washer System Spray Nozzle

  • Overview. Refer to → Chapter "Overview - Headlamp Washer System".

3 - Wiper Arm

  • Overview. Refer to → Chapter "Overview - Windshield Wiper System".

4 - Spray Nozzle

  • Overview. Refer to → Chapter "Overview - Windshield Washer System".

5 - Grommet

  • For the windshield washer fluid hose inside the hood

6 - Grommet

  • For the windshield washer fluid hose on the fender

7 - Windshield Wiper Motor -V-

  • With Wiper Motor Control Module -J400-
  • Overview. Refer to → Chapter "Overview - Windshield Wiper System".

8 - Windshield Washer Fluid Reservoir

  • Overview. Refer to → Chapter "Overview - Windshield Washer System".

9 - Filler Tube

  • For the windshield washer fluid reservoir
  • Overview. Refer to → Chapter "Overview - Windshield Washer System".

Overview - Windshield Wiper System

Overview - Windshield Wiper System

Overview - Windshield Wiper System

1 - Screw

  • Tightening sequence. Refer to → Fig. "Tightening Specifications and Sequence for the Windshield Wiper Motor".

2 - Windshield Wiper Motor -V-

  • With Wiper Motor Control Module -J400-
  • Removing and installing. Refer to → Chapter "Windshield Wiper Motor -V-, Removing and Installing".
  • Replacing. Refer to → Chapter "Windshield Wiper Motor, Replacing".

3 - Screw

  • Tightening sequence. Refer to → Fig. "Tightening Specifications and Sequence for the Windshield Wiper Motor".

4 - Nut

  • 22 N·m

5 - Cap

6 - Passenger Side Windshield Wiper Arm

  • There are different lengths. Refer to the Parts Catalog.
  • Removing and installing. Refer to → Chapter "Windshield Wiper Arms, Removing and Installing".
  • Adjusting. Refer to → Chapter "Windshield Wiper Arms, Adjusting".

7 - Passenger Side Windshield Wiper Blade

  • There are different lengths. Refer to the Parts Catalog.
  • Replacing. Refer to → Chapter "Wiper Blade, Removing and Installing".

8 - Driver Side Windshield Wiper Blade

  • There are different lengths. Refer to the Parts Catalog.
  • Replacing. Refer to → Chapter "Wiper Blade, Removing and Installing".

9 - Driver Side Windshield Wiper Arm

  • There are different lengths. Refer to the Parts Catalog.
  • Removing and installing. Refer to → Chapter "Windshield Wiper Arms, Removing and Installing".
  • Adjusting. Refer to → Chapter "Windshield Wiper Arms, Adjusting".

10 - Cap

11 - Nut

  • 22 N·m

12 - Screw

  • Tightening sequence. Refer to → Fig. "Tightening Specifications and Sequence for the Windshield Wiper Motor".

Tightening Specifications and Sequence for the Windshield Wiper Motor

- Tighten the bolts in stages in the sequence shown:

A92-10234
Tightening Specifications and Sequence for the Windshield Wiper Motor

Overview - Windshield Wiper System, Rain/Light Recognition Sensor

Overview - Windshield Wiper System, Rain/Light Recognition Sensor

1 - Silicon Pad

  • There are different versions. Refer to the Parts Catalog.
  • Replace after removal

2 - Retaining Plate

  • For Rain/Light Recognition Sensor -G397-
  • Attached to the windshield

3 - Clamp

4 - Rain/Light Recognition Sensor -G397-

  • There are different versions. Refer to the Parts Catalog.
  • Removing and installing. Refer to → Chapter "Rain/Light Recognition Sensor -G397-, Removing and Installing, with Humidity Sensor -G355-".
  • Replacing. Refer to → Chapter "Rain/Light Recognition Sensor -G397-, Replacing, with Humidity Sensor -G355-".