Transmission
Final Drive
In this manual: Transmission
~2min read
Overview - Final Drive

1 - Flywheel
- Removing and installing, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Seals; Left Seal, Replacing
2 - Shaft Seal
- For the left flange shaft
- Between the final drive and the transmission housing
- Replacing, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Seals; Left Seal, Replacing.
3 - Shim
- Behind the taper roller bearing outer race
4 - Taper Roller Bearing Outer Race
5 - Differential
6 - Bolt
- Quantity 10
- Tightening specification and sequence, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Final Drive; Overview - Final Drive.
7 - Locking Ring
- Replacing
8 - Right Flange Shaft
- Refer to → Chapter "Right Flange Shaft, Removing and Installing"
9 - Shaft Seal
- For the right flange shaft
- Replacing, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Seals; Right Seal, Replacing.
10 - Front Final Drive Cover
- Removing and installing, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Seals; Left Seal, Replacing.
11 - O-Ring
- On the front final drive cover
- Replacing
12 - Shim
- Behind the taper roller bearing outer race
13 - Taper Roller Bearing Outer Race
14 - Spring Pin
15 - Selector Lever
16 - Shaft Seal
- For the selector shaft
17 - Bolt
- Quantity: 3
- Tightening specification, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Final Drive; Overview - Final Drive.
18 - Left Flange Shaft
- Removing and installing, refer to → S tronic Transmission Internal Components; Rep. Gr.39; Differential; Left Flange Shaft, Removing and Installing.
19 - Gear Carrier
- Attached to the left flange shaft with the bearing -20- and the circlip -21-
20 - Bearings
- For the left flange shaft
- Pressed on to the left flange shaft
21 - Locking Ring
- For the left flange shaft bearing
- Replacing
22 - Shaft Seal
- For the input shaft
- Replacing, refer to → S tronic Transmission Internal Components; Rep. Gr.35; Input Shaft; Input Shaft Seal, Replacing.
Was this page helpful?