Maintenance and Care

Service interval display

~2min read

The service interval display detects when your vehicle is due for service.

The service interval display works in two stages:

  • Inspection or oil change reminder: after a certain distance driven, a message appears in the instrument cluster display each time the ignition is switched on or off. The remaining distance or time is displayed briefly.
  • Inspection or oil change due: if your vehicle has reached an inspection or oil change interval or both intervals at the same time, the message Inspection due! or Oil change due! or Oil change and inspection due! appears briefly after switching the ignition on/off.

Checking service intervals

You can check the remaining distance or time until the next oil change or next inspection in the Car menu. To do this, select: the [CAR] function button > (Car) Systems control button > Service & checks > Service intervals.

Resetting the indicator

Your authorized Audi dealer or authorized Audi Service Facility will reset the service interval display after performing service.

If you have changed the oil yourself, you must reset the oil change interval.

To reset the indicator, select: the |CAR| function button > (Car) Systems control button > Service & checks > Service intervals. Turn the control knob downward to Reset oil change interval and press the control knob.

Note

  • Only reset the oil change indicator if the oil was changed.
  • Following the service intervals is critical to maintaining the service life and value of your vehicle, especially the engine. Even if the mileage on the vehicle is low, do not exceed the time for the next service.
  • Calculating the time to the next oil change is interrupted when the vehicle battery is disconnected.