Starting and driving
Starting the engine when there is a malfunction
In this manual: Starting and driving
~1min read
It may not be possible to start the engine under certain circumstances, for example if the battery in the vehicle key is drained, if interference is affected the key or if there is a system malfunction.
.48.png)
Fig. 79 Center console/remote control key: starting the engine if there is a malfunction
Requirement: the message Key is not recognized.
Hold back of key against marked area.
See owner's manual must appear and the
indicator light must turn on.
- Hold the remote control key in the location indicated as shown in the illustration
fig. 79. - Press the brake pedal.
- Press the [START ENGINE STOP] button. The engine will start.
- Drive to an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
Tips
You can view the message again by pressing the [START ENGINE STOP] button.
Was this page helpful?