Electrical System

Valet Parking Lock Button -E536-, Removing and Installing

~3min read

Removing

- Remove the glove compartment. Refer to → Body Interior; Rep. Gr.68; Storage Compartments and Covers; Glove Compartment, Removing and Installing.

- Open the retainers in direction of -arrows- and remove the valet parking lock button -2- forward.

- Disconnect the connector -1-.

Installing

Install in reverse order of removal.

A96-10904

Glove Compartment Lamp Switch -E26-, Removing and Installing

Removing

- Remove the glove compartment. Refer to → Body Interior; Rep. Gr.68; Storage Compartments and Covers; Glove Compartment, Removing and Installing.

- Disconnect the connector -1-.

- Remove the hinge bolts -3-.

- Turn the switch -2- counter-clockwise -arrow- and remove it.

Installing

Install in reverse order of removal.

A96-10880

Mirror Adjusting Switch -E43-/Folding Mirror Adjustment Switch -E168-, Removing and Installing

Removing

- Remove the power window control head in the driver door. Refer to → Chapter "Power Window Control Head In Driver Door -E512-, Removing and Installing".

- Remove the pull handle/front armrest. Refer to → Body Interior; Rep. Gr.70; Front Door Trim Panels; Overview - Front Door Trim Panel.

- Carefully release the hooks -arrows- with a small screwdriver.

- Remove the mirror adjusting switch -1- from the switch mount -3-.

- Disconnect the connector -2-.

Installing

Install in reverse order of removal. Note the following:

Note

When installing, ensure symbol panel is inserted in front of mirror adjusting switch.

A96-10908

Power Window Control Head In Driver Door -E512-, Removing and Installing

Removing

- Remove the front door trim panel and move the noise insulation to the side. Refer to → Body Interior; Rep. Gr.70; Front Door Trim Panels; Front Door Trim Panel, Removing and Installing.

- Carefully release the hooks in direction of -arrows A- with a small screwdriver.

- Release the unlock button -4- in direction of -arrow B-.

- Press the power window switch -1- out of the switch mount -2-.

- Disconnect the connector -3-.

Installing

Install in reverse order of removal.

A96-10909

Front Passenger Door Window Regulator Switch -E107-, Removing and Installing

Removing

- Remove the front door trim panel and move the noise insulation to the side. Refer to → Body Interior; Rep. Gr.70; Front Door Trim Panels; Front Door Trim Panel, Removing and Installing.

- Disconnect the connector -1-.

- Carefully release the hooks in direction of -arrows- with a small screwdriver.

- Press the power window switch -3- out of the switch mount -2-.

Installing

Install in reverse order of removal.

A96-10910

Driver/Front Passenger Interior Locking Switch -E150-/-E198-, Removing and Installing

Removing

- Remove the front door trim panel. Refer to → Body Interior; Rep. Gr.70; Front Door Trim Panels; Front Door Trim Panel, Removing and Installing.

- Disconnect the connector -1-.

- Open the clips -arrows- and remove the interior locking switch -2- outward.

Installing

Install in reverse order of removal.

A96-10847

Driver/Front Passenger Memory Seat Control Head -E97-/-E277-, Removing and Installing

Removing

- Remove the interior door mechanism trim. Refer to → Body Interior; Rep. Gr.70; Front Door Trim Panels; Overview - Front Door Trim Panel.

- Push the tab -3- slightly to the rear and remove the control head -1- from the mount at the same time in direction of -arrow-.

- Disconnect the connector -2-.

- Remove the control head.

A96-10905

Installing

Install in reverse order of removal. Note the following:

- Connect the connectors.

- Place the control head -1- on the mount -2- and push on it until the tab -4- clicks into place in direction of -arrow-.

  • The guide -3- must slide downward behind the mount.
A96-10906