Instruments and Controls
Clock
In this manual: Instruments and Controls
3steps
~18min
2/5difficulty
Done 0 of 3
To set the time and date:
- Turn the ignition key to ACC/ ACCESSORY or ON/RUN.
to turn the radio on.
and HR, MIN, MM, DD, and YYYY (hour, minute, month, day, and year) display.- Press the softkey below the selected tab.
- Press
SEEK, or
FWD. - Turn f clockwise.
- To decrease the time or date do one of the following:
- Press
SEEK or
REV. - Turn
counterclockwise.
The date does not automatically display. To see the date press
while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display.
To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year:
- Press
and then the softkey below the forward arrow label to select the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/ MM/YYYY (day, month, and year) display. - Press the softkey below the desired option.
- Press
again to apply the selected default, or let the screen time out.
Test yourself
A quick Chevrolet Captiva quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?