Rear Door Handle

Removal

1. 1
   Lower rear door latch into door, Do not remove latch, pull downward to access rear handle housing screws.
2. 2
   Remove water deflector.
3. 3
   Disconnect to outside door handle rod.
4. 4
   Remove two handle screws, Fig. 1.
5. 5
   Remove rear side door outside handle cylinder cover, Fig. 1.
6. 6
   Remove rear side door outside handle cover gasket, Fig. 1.
7. 7
   Pull outside handle rearward to release it from inside handle housing.
8. 8
   Remove rear door handle.

Installation

Reverse procedure to install. Torque latch screws to 89 inch lbs.

Fig. 1 Rear door handle removal