Battery Negative Cable Disconnection and Reconnection

Removal Procedure

1. 1
   Turn on the radio and record all of the customer radio station presets.
2. 2
   Ensure that all lamps and accessories are turned off.
3. 3
   Turn the ignition OFF and remove the ignition key.

Warning: Refer to Battery Disconnect Warning in the Preface section.

1. 1
   Loosen the negative battery cable nut (2).
2. 2
   Remove the negative battery cable (1) from the battery.

Installation Procedure

1. Install the negative battery cable (1) to the battery.

Caution: Refer to Fastener Caution in the Preface section.

1. 1
   Fasten the negative battery cable nut (2) and tighten the nut to 4 N·m.
2. 2
   Insert the ignition key and turn the ignition to the ON position.
3. 3
   Program volatile memory. Refer to Volatile Memory Programming.
4. 4
   Program all of the customer's radio station presets and set the radio clock to the current time.

Exhaust Flexible Pipe Replacement (1.6L LDE, LXV, and 1.8L 2H0)

Warning: Refer to Exhaust Service Warning in the Preface section.

Warning: Refer to Protective Goggles and Glove Warning in the Preface section.

Preliminary Procedure

Raise the vehicle by its full height. Refer to Lifting and Jacking the Vehicle.

1. 1
   Exhaust Muffler Insulator (Qty: 2)
2. 2
   Exhaust Flexible Pipe Gasket to Exhaust Rear Muffler
3. 3
   Exhaust Flexible Pipe to Exhaust Rear Muffler Nuts (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 17 N·m

1. 1
   Exhaust Pipe Front Hanger Bracket
2. 2
   Exhaust Pipe Front Hanger Bracket Bolts and Nuts

Tighten 20 N·m

1. 1
   Catalytic Converter to Exhaust Flexible Pipe Gasket
2. 2
   Catalytic Converter to Exhaust Flexible Pipe Nuts (Qty: 3)

Tighten 20 N·m

8. Heated Oxygen Sensor

Tighten 40 N·m