Drive Belt Replacement

Special Tools

EN 6349 Locking Pin

For equivalent regional tools, refer to Special Tools.

Removal Procedure

1. 1
   Open the hood.
2. 2
   Remove the power steering pump belt. Refer to Power Steering Pump Belt Replacement.
3. 3
   Raise the vehicle by its full height. Refer to Lifting and Jacking the Vehicle.
4. 4
   Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement.

   

5. 5
   Release tension to the drive belt tensioner counterclockwise (1) and lock with EN 6349 pin (2).

   

6. 6
   Remove the drive belt (1).

Installation Procedure

1. 1
   Install the drive belt (1).

   

2. 2
   Release tension to the tensioner at projection (1) counterclockwise.

Note: Allow tensioner to slide back slowly.

1. 1
   Remove EN 6349 pin (2).
2. 2
   Apply tension to the tensioner at projection (1) clockwise.
3. 3
   Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement.
4. 4
   Lower the vehicle by its full height.
5. 5
   Install the power steering pump belt. Refer to Power Steering Pump Belt Replacement.
6. 6
   Close the hood.