Front End Inflatable Restraint Discriminating Sensor Replacement

Warning: Refer to SIR Warning in the Preface section.

Warning: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:

• The seat cushion frame
• The seat recliner, if equipped
• The seat adjuster
• The seat back frame

Failure to do so may cause future personal injury.

Preliminary Procedure

Disable the SIR system. Refer to SIR Disabling and Enabling.

Inflatable Restraint Front End Sensor Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten 7,5 N·m

Inflatable Restraint Front End Sensor Assembly

Procedure

1. 1
   Disconnect electrical connector.
2. 2
   Loosen the bolt and slide the sensor out of the keyhole slot.

Tip

The bolt is integral to the sensor assembly, DO NOT remove separately.