Information Messages
Messages are displayed on the Driver Information Center (DIC), InfoDisplay, or are issued as warning tones.
Acknowledge a warning message using the multifunction lever. If necessary, contact a service station for assistance.

Information messages are displayed as digital codes.
No. Information Message
2 Remote control not detected. Depress the clutch pedal to restart.
5 Steering column locked.
7 Turn the steering wheel, switch the ignition off and then on again.
9 Turn the steering wheel and restart the engine.
25 Left front turn signal malfunction.
26 Left rear turn signal malfunction.
27 Right front turn signal malfunction.
28 Right rear turn signal malfunction.
No. Information Message 35 Replace the remote control battery.
54 Condensation in the diesel fuel filter.
55 Service the diesel particulate filter.
67 Service the steering column lock.
68 Service the power steering system.
75 Service the air conditioning system 79 Add engine oil.
82 Engine oil change due soon.
84 Engine power reduced.
No. Information Message
91 Remote control not detected.
Move the electronic key or use the slot in the center console.
92 Remote control not detected. Depress the brake pedal to restart.
94 Shift the selector lever to PARK 95 Service the airbag system
Warning Tones
When starting the engine or while driving
• If the seat belt is not fastened.
• If the set speed is exceeded with the parking brake applied.
• If a warning code is displayed on the Driver Information Center.
• If the parking assist system detects an obstacle.
When the vehicle is parked and/or a door is open
• When the key is inserted in the ignition lock.
• When the exterior lights are on.
Test yourself
A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.