Installation Procedure

1. 1
   Drill 8 mm (5/16 in) for plug welding along the edges of the front compartment upper side rail as noted from the original panel.
2. 2
   Clean and prepare the attaching surfaces for welding.

   

3. 3
   Position the front compartment upper side rail on the vehicle.
4. 4
   Verify the fit of the front compartment upper side rail.
5. 5
   Clamp the front compartment upper side rail into position.

   

Note: Plug weld factory slots in the front hinge pillar body area (1) as noted from the original panel.

1. 1
   Plug weld accordingly.
2. 2
   Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
3. 3
   Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
4. 4
   Install all related panels and components.
5. 5
   Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
6. 6
   Enable the SIR system. Refer to SIR Disabling and Enabling.