Installation Procedure

Clean and prepare the attaching surfaces for welding.

Apply structural adhesive to the attaching surfaces.

Position the body rear end panel on the vehicle.

Verify the fit of the body rear end panel.

Clamp the body rear end panel into position.

Spot weld accordingly as noted from the original part.

Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.

Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.

Install all related panels and components.

Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

Enable the SIR system. Refer to SIR Disabling and Enabling.