Installation Procedure

Apply structural adhesive on the flanges of the front side door inner panel where the front side door outer panel bears on.

Align the front side door outer panel.

Verify the fit of the front side door outer panel.

Clamp the front side door outer panel into position.

Pre-flanging the flange with BO-6396 pliers and BO-6392 tool kit .

Continue to hammer in stages along the hem flanges.

Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.

Install the outside rearview mirror. Refer to Outside Rearview Mirror Replacement.

Install the front side door outside handle. Refer to Front Side Door Outside Handle Replacement.

Install the front side door. Refer to Front Side Door Replacement.

Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.

Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.

Enable the SIR system. Refer to SIR Disabling and Enabling.