Removal Procedure

Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section.

1. 1
   Disable the SIR System. Refer to SIR Disabling and Enabling.
2. 2
   Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
3. 3
   Remove all related panels and components.
4. 4
   Visually inspect the damage. Repair as much of the damage as possible.
5. 5
   Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
6. 6
   Locate and mark all factory welds.

   

7. 7
   Drill all factory welds. Note the number and location of welds for installation of the service assembly.
8. 8
   Cut the adhesive with an appropriate tool.

   

9. 9
   Remove the damaged roof panel (1).