Windshield Washer Nozzle Hose Replacement

Preliminary Procedure

1. 1
   Remove the hood insulator. Refer to Hood Insulator Replacement.
2. 2
   Place a clean container under the front driver side near where the windshield washer nozzle and windshield washer pump hose will be disconnected.
3. 3
   Recover all lost windshield washer solvent.
4. 4
   Windshield Washer Nozzle Hose

Tip

Disconnect the washer hose from both hood mounted washer nozzles.

1. 1
   Windshield Washer Hose Retainer to Hood Hinge
2. 2
   Windshield Washer Nozzle Hose Integral Connector

Tip

Disconnect the hoses in order to remove the windshield washer nozzle hose.

4. Windshield Washer Pump Hose

Windshield Washer Nozzle Replacement

Preliminary Procedure

1. 1
   Disconnect the washer hose from the washer nozzles.
2. 2
   Remove the hood insulator. Refer to Hood Insulator Replacement

Windshield Washer Nozzle Assembly

Tip

Pinch the washer nozzle from the bottom side in order to release the nozzle and push the nozzle outboard from the hood to remove.

Windshield Washer Solvent Container Filler Tube Replacement

Windshield Washer Solvent Container Filler Tube Assembly

Procedure

1. Pull the upper tube assembly from the lower washer container and inspect the grommet (1), replace if damaged.

Windshield Washer Solvent Container Grommet Replacement

Preliminary Procedure

Remove the windshield washer solvent container filler tube assembly. Refer to Windshield Washer Solvent Container Filler Tube Replacement

1. Windshield Washer Solvent Container Grommet