Changing a

Procedure for replacing a worn wiper blade with a new one, without any tools.

Before removing a front blade

- Within one minute of switching off the ignition, operate the wiper control to position the blades vertically.

This position must be used to avoid damaging the wiper and the bonnet.

Removal

- Lift the corresponding arm.

- Unclip the blade and remove it.

Refitting

- At the front, check the blade size, as the shorter blade is fitted on the passenger side of the vehicle.

- Fit the new corresponding blade and clip it in place.

- Lower the arm carefully.

After refitting a front blade

- Switch on the ignition.

- Operate the wiper control again to park the blades.