Selectable Instrument Cluster Display Menu Items

Press and release the upor downarrow button until the desired menu item is displayed in the instrument cluster display.

Follow the menu or submenu prompts as desired.

Speedometer

Press and release the upor downarrow button until the speedometer menu is displayed in the instrument cluster display. Press and release the OK button to toggle the speedometer units (km/h or mph).

Vehicle Information

Press and release the upor downarrow button until the "Vehicle Information" menu is displayed in the instrument cluster display. Press and release the rightor leftarrow button to scroll through the "Vehicle Information" submenu items. Follow the directional prompts to access or reset any of the following "Vehicle Information" submenu items:

• Tire Pressure Monitor
• Engine Coolant Temperature
• Transmission Temperature
• Oil Temperature
• Oil Pressure
• Oil Life
• Battery Voltage

Driver Assist — if equipped

The Driver Assist menu shows the status of the ACC and LaneSense systems.

Press and release the upor downpress the arrow button while the Driver Assist menu is displayed in the instrument cluster display.

Adaptive Cruise Control (ACC) Feature

The instrument cluster displays the current ACC settings. Information is displayed depending on the ACC system status.

Press the ACC On/Off button (located on the steering wheel) until one of the following is displayed in the instrument cluster display:

Adaptive Cruise Control Off

When ACC is deactivated, the display shows "Adaptive Cruise Control Off."

Adaptive Cruise Control Ready

When ACC is activated but no vehicle speed is selected, the display shows "Adaptive Cruise Control Ready."

Press the SET+ or SET- button (located on the steering wheel) and perform the following steps. The instrument cluster display shows:

ACC SET

When ACC is set, the set speed is displayed in the instrument cluster.

The ACC display may appear again if any ACC activity occurs, which may include any of the following:

• Changing the distance setting
• System cancellation
• Driver override
• System off
• ACC proximity warning
• ACC unavailable warning

The instrument cluster display returns to the last selected display after five seconds without ACC display activity.

LaneSense — If Equipped

The instrument cluster displays the current LaneSense settings. Information is displayed depending on the LaneSense system status and the conditions that must be met.

Fuel Economy

Two submenu pages; one with the current value displayed (Instant Fuel Economy) and one without a current value display (press the left or rightarrow button to select one):

• Current fuel economy (MPG, L/100 km or km/L).
• Distance to empty (miles or km).
• Average fuel economy (miles per gallon, L/100 km or km/L).
• Max and Min values will correspond to the specific engine requirements.
• The bottom end of the gauge will be displayed in amber and turns green when fuel economy improves.
• Press and hold the OK button to reset the average fuel economy data.

Trip Information

Press and release the upor downpress the arrow button while Trip Menu is displayed in the instrument cluster display. Press the left or rightarrow button to select Trip A or Trip B. Trip information will display the following:

• Distance — shows the total distance (in miles or km) traveled on Trip A or Trip B since the last reset.
• Average fuel economy — shows the average fuel economy (miles per gallon, L/100 km or km/L) for Trip A or Trip B since the last reset.
• Elapsed time — shows the total elapsed driving time since the last reset.

Press and hold the OK button to reset the trip information.

Audio

This menu shows audio information about the currently playing audio source (for example, FM radio).

Messages

This feature shows the number of stored warning messages, if any. Press the right or leftarrow button to scroll through the stored messages.

Display Settings

Press and release the upor downpress the arrow button until the Setup Menu is displayed in the instrument cluster display. Press and release the OK button to enter the submenu. The Display Setup feature allows you to change what information is displayed in the instrument cluster and where the information is displayed.

1. 1
   Top Left

   • None
   • Compass
   • Outside Temperature
   • Time
   • Range
   • Average L/100 km (miles per gallon or km/L)
   • Current L/100 km (miles per gallon or km/L)
   • Trip A
   • Trip B
   • Trailer Trip
   • Boost
2. 2
   Top Right

   • None
   • Compass
   • Outside Temperature
   • Time
   • Distance to Empty
   • Average L/100 km (miles per gallon or km/L)
   • Current L/100 km (miles per gallon or km/L)
   • Trip A
   • Trip B
   • Trailer Trip
   • Boost
3. 3
   Current Gear

   • On
   • Off
4. 4
   Gear Display

   • Full
   • Single
5. 5
   Favorites Menu

   • Speedometer
   • Vehicle Information
   • Performance
   • Driver Assist
   • Fuel Economy
   • Trip
   • Audio
   • Stored Messages
   • Display Settings
   • Diagnostic Codes
   • Speed Warning
6. 6
   Default

   • Restore
   • Cancel

Diagnostics — If Equipped

This feature allows the driver to view engine and emissions faults on the vehicle.

• Press OK to display the most recent diagnostic trouble code.
• There is a delay when requesting the next diagnostic code, during which the following message is displayed:

  "System Check for Diagnostic Trouble Codes."

• The driver must press the OK button again to view the next P-code; otherwise, the current message continues to be displayed.
• The driver exits when moving to another submenu (up or down).
• Faults are displayed from newest to oldest.
• If the menu is exited before reaching the end of the codes, the list will restart from the beginning when the driver re-enters.
• When there are no codes or the last code has been reached (P0000), the following message is displayed:

  "No or end of diagnostic codes."