Linking and Unlinking the Key Fob to Memory

Your key fobs can be programmed to recall one of two stored memory profiles.

NOTE:

Before programming the key fobs, select the "Memory Linked to Key Fob" function through the Uconnect system.

To program the key fobs, perform the following steps:

1. 1
   Set the ignition to the OFF position.
2. 2
   Select the desired memory profile, 1 or 2.
3. 3
   After recalling the profile, press and release the Set (S) button on the memory switch.
4. 4
   Within five seconds, press and release button (1) or (2), respectively. "Memory Profile Set" (1 or 2) will be displayed in the instrument cluster.
5. 5
   Press and release the Lock button on the key fob within 10 seconds.

NOTE:

To unlink your key fob from the memory settings, press the Set (S) button, then press the Unlock button on the key fob within 10 seconds.