Memory Function Programming

To create a new memory profile, perform the following steps:

NOTE:

When a new profile is stored in memory, the selected profile will be deleted from memory.

1. Set the ignition to the ON/RUN position (do not start the engine).

2. Adjust all memory profile settings to the desired preferences (for example, seat, mirror, power tilt and telescoping steering column [if equipped] and preset radio stations).

3. Press and release the Set (S) button on the memory switch, then press the desired memory button (1 or 2) within five seconds. The instrument cluster display will show which memory position was set.

NOTE:

Memory profiles can be set while the vehicle is in PARK, but the vehicle must be in PARK to recall a memory profile.