Identification data

It is advisable to write down the abbreviated identification data. The data printed on the plates and their arrangement are as follows, fig. 1:

• Summary of identification data
• Chassis identification
• Body paint identification plate
• Engine identification.

The plate is located on the front crossmember in the engine compartment and contains the following data:

1. 1
   Type approval number.
2. 2
   Vehicle type code.
3. 3
   Consecutive chassis production number.
4. 4
   Maximum permissible gross vehicle weight.
5. 5
   Maximum permissible gross combined weight of vehicle and trailer.

   

1. 1
   Maximum permissible front axle load.
2. 2
   Maximum permissible rear axle load.
3. 3
   Engine type.
4. 4
   Body version code.
5. 5
   Spare parts order number.
6. 6
   Correct smoke coefficient of exhaust gases (for diesel engines).

The identification is stamped into the floor pan of the passenger compartment next to the front right seat.

To access it, slide flap A, fig. 3, forward.

The identification includes:

• The vehicle type (ZFA 198000);
• The consecutive chassis production number.

The plate is located on the inside of the bonnet and shows the following data:

1. 1
   Paint manufacturer.
2. 2
   Colour name.
3. 3
   FIAT colour code.
4. 4
   Colour code for touch-up or repainting.

The identification is stamped on the cylinder block and includes the type and consecutive production number.