Radio (Tuner)

To select the Radio function while listening to another audio source, briefly press the RADIO button repeatedly to select the desired band: FM, AM or DAB (where fitted).

Once Radio mode is activated, the display shows the name (RDS stations only) and frequency of the selected radio station, the selected frequency band (e.g. FMA) and the preset button number (e.g. P1).

Each press of the button cycles through the FM, AM and DAB (where fitted) bands.

Preset buttons

Buttons 1 to 6 allow you to set the following presets:

• 18 in the FM band (6 in FM-A, 6 in FM-B and 6 in FM-C);
• 18 in the AM band (6 in AM-A, 6 in AM-B and 6 in AM-C).

To recall a preset station, select the desired frequency band by pressing the RADIO button, then press the ABC button to select the preset bank (A, B or C), and finally briefly press the corresponding preset button (1 to 6).

Press and hold the corresponding preset button for more than 2 seconds to store the tuned station. Storing is confirmed by an audible signal.

Automatic tuning

Briefly press the buttonorto start the automatic search for the next station that can be received in the selected direction.

Manual tuning

Select the desired frequency band and then briefly and repeatedly press the buttonorto start searching in the desired direction. If the buttonoris pressed longer, fast search is activated, which stops when the button is released.

USB/iPod mode

To activate USB/iPod mode, insert a suitable device (a USB stick or other device) into the USB port in the vehicle's glovebox.

When a USB/iPod device is inserted with the system switched on, it starts playing the tracks stored on the device.

AUX mode

To activate the AUX source, repeatedly press the MEDIA button or the SRC steering wheel control until the corresponding source appears on the display.