Models with start&stop system

(for versions/markets where fitted) To charge the battery:

• disconnect connector B, Fig. 109 (by pressing button A), from battery status sensor C, fitted to the negative battery terminal D;
• connect the positive lead of the charger to the positive battery terminal and the negative lead to the negative battery terminal clamp D;
• switch on the charger. When charging is complete, switch off the charger. After disconnecting the charger, reconnect connector B to sensor C.

CAUTION

160) The battery electrolyte is corrosive and toxic. Avoid contact with skin and eyes. Charge the battery in a well-ventilated area, away from open flames and sources of sparks, to prevent the risk of explosion and fire.

161) Do not charge a frozen battery. Thaw it first to avoid the risk of explosion.

If the battery has frozen, qualified personnel must first check that the internal components are not damaged and that the casing is not cracked, as electrolyte may leak out. Electrolyte is toxic and corrosive. Only then charge the battery.