Fiat Uno Quiz
Bodywork

Front bumpers - removal and refitting

In this manual: Bodywork
Fiat Uno Service and Repair Manual — 3Engine — 47Ignition system — 14Braking system — 21Electrical system — 38Steering — 11Suspension — 13Bodywork — 29Supplement: Revisions and information on later models — 18Wiring diagrams — 45Cooling and heating systems — 15Fuel system — 21
~1min read

1 Remove the radiator grille as described in Section 6 to expose the two upper bumper fixing screws. Remove them (photos).

9.1A Front bumper upper fixing screw
9.1A Front bumper upper fixing screw 9.1B Front bumper upper fixing screw
9.1B Front bumper upper fixing screw 2 Working inside at the lower edge of the bumper remove the three fixing bolts. 3 Finally, unscrew the side bracket fixing bolts and lift the bumper away.

4 Refitting is a reversal of removal.

Fig. 12.3 Front bumper (Sec 9)
Fig. 12.3 Front bumper (Sec 9) Fig. 12.4 Front bumper upper screws (Sec 9)
Fig. 12.4 Front bumper upper screws (Sec 9) Fig. 12.5 Front bumper lower screws (Sec 9)
Fig. 12.5 Front bumper lower screws (Sec 9)

Test yourself

A quick Fiat Uno quiz: every answer comes with an explanation and a link to the manual page.