Bodywork
Rear bumpers - removal and refitting
In this manual: Bodywork
~1min read
1 Refer to Chapter 9 and withdraw the number plate lamp. Disconnect the leads. 2 Open the tailgate and three bumper fixing bolts from the top edge. 3 Working under the car, remove the two side and the three lower edge fixing bolts. 4 Remove the bumper from the car.
Fig. 12.21 Rear bumper (Sec 26)
5 Refitting is a reversal of removal.
Fig. 12.21 Rear bumper (Sec 26)
Test yourself
A quick Fiat Uno quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?