General Procedures - Brake Service Mode Activation and Deactivation

Activation

1. 1
   Turn the ignition on.
2. 2
   Release the EPB.
3. 3
   Press and hold the accelerator pedal and move the EPB switch to the RELEASE (down) position. Continue holding the accelerator pedal and the EPB switch.
4. 4
   Turn the ignition off, then turn the ignition on, within 5 seconds . Continue holding the accelerator pedal and the EPB switch.
5. 5
   Turn the ignition off, then release the accelerator pedal and the EPB switch.
   

Deactivation

NOTICE: When the brake system is placed in service mode, brake system performance will be significantly reduced.

1. 1
   Turn the ignition on.
2. 2
   Press and hold the accelerator pedal.
3. 3
   Move the EPB switch to the APPLY (up) position. Continue holding the accelerator pedal and the EPB switch.
4. 4
   Firmly depress the brake pedal for at least 1 second. Release the brake pedal while continuing to hold the accelerator pedal and the EPB switch.
5. 5
   Turn the ignition off, then turn the ignition on within 5 seconds , then release the accelerator pedal and the EPB switch.