Removal and Installation - Front Bumper

Special Service Tools / General Equipment

Interior trim removal tool

Removal

1. 1
   Remove the front bumper cover.
   Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
2. 2
   Remove the push pins, release the clips and remove the upper radiator air deflector.
   Use general equipment: Interior Trim Removal Tool.

   

3. 3
   Remove the push pins, release the clips and remove the lower radiator air deflector.
   Use common service equipment: interior trim removal tool.

   

4. 4
   1. Disconnect the horn electrical connector.

   2. Both sides.
      Remove the bolts and the horn and bracket assembly.
      Torque: 97 lb-in (11 N·m)

   

5. 5
   Release the wiring harness guides and set the wiring harness aside.

   

6. 6
   Release the wiring harness guides and set the wiring harness aside.

   

7. 7
   Remove the cooling module.
   Refer to: Cooling Module (303-03A Engine Cooling - 1.5 L EcoBoost (132 kW/180 L hp) - I3 (Y1), Removal and Installation).
   Refer to: Cooling Module (303-03C Engine Cooling, Removal and Installation).
   Refer to: Cooling Module (303-03B Engine Cooling - 2 L EcoBoost (177 kW/240 L hp) - MI4, Removal and Installation).
8. 8
   With the aid of an assistant.
   Remove the bolts, nuts and the front bumper.
   Torque: 46 lb-ft (63 N·m)

   

Installation

1. To install, reverse the removal procedure.