Removal and Installation — Rear Seat Armrest

Special Service Tools / General Equipment

Interior trim removal tool

Removal

1. 1
   Remove the rear seat.
   Refer to: Rear Seat (501-10B Rear Seats, Removal and Installation).
2. 2
   Disconnect the rear seat back trim panel J-clip.

   

3. 3
   Remove the rear seat back trim panel from the inside of the child safety seat anchor.
   Use the general equipment: interior trim remover.

   

4. 4
   
   

   1. Unzip the rear seat back inner side trim panel.

   2. Install the rear seat back trim panel.

   

5. 5
   Remove the rear seat armrest bolts.
   Torque: 71 lb-in (8 N·m)

   

6. 6
   Raise the rear seat back to the upright position.

   

7. 7
   Position the rear seat armrest in the lowered position.

   

8. 8
   
   Remove the rear seat armrest.
   

   • Lift the rear seat armrest up and out to release the retainers.

   

Installation

1. To install, reverse the removal procedure.