Ford Fiesta Quiz
Climate Control System

Air Inlet Duct. Removal and Installation

In this manual: Climate Control System
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
3steps
~18min
2/5difficulty
Done 0 of 3

Removal

  1. Remove the heater core and evaporator core housing - vehicles with: EMTC and remove the climate control housing - vehicles with: EATC.
    Refer to: Heater Core and Evaporator Core Housing - vehicles with: Electronic Manual Temperature Control (EMTC) (412-00 Climate Control System - General Information, Removal and Installation).
    Refer to: Heater Core and Evaporator Core Housing - vehicles with: Electronic Automatic Temperature Control (EATC) (412-00 Climate Control System - General Information, Removal and Installation).
  2. Release the clips from the intake duct.
  3. Remove the clips and the intake duct.

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.