Ford Fiesta Quiz
Engine

Heater Hoses. Removal and Installation

In this manual: Engine
Service Information — 27Suspension — 48Transmission — 9Brake System — 52Steering — 21Engine — 140Manual Transmission, Clutch, Transfer Case and Power Transfer Unit — 48Exhaust System — 6Fuel System — 21Climate Control System — 58Instrumentation and Warning Systems — 26Battery and Charging System — 20Infotainment Systems — 41Lighting — 29Power Distribution — 11Electronic Function Group — 30Body and Paint — 275Frame and Mounting — 3
5steps
~30min
2/5difficulty
Done 0 of 5

Special Service Tools / General Equipment

Hose Clamp Removal/Installation Tool

Removal

  1. Remove the battery tray.
    Refer to: Battery Compartment — 1.6 L Duratec-16V Ti-VCT (88 kW/120 L PS) — Sigma (414-01 Battery, Mounting and Cables, Removal and Installation).
  2. Drain the cooling system.
    Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03B Engine Cooling – 1.6 L EcoBoost (132 kW/180 L hp) – Sigma, General Procedures).
  3. Loosen the hose clamps and remove the heater hoses.
    Use common equipment: Hose clamp removal/installation tool.

Installation

  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system.
    Refer to: Engine Coolant Draining, Vacuum Filling and Bleeding (303-03B Engine Cooling — 1.6 L EcoBoost (132 kW/180 L hp) — Sigma, General Procedures).

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.