Powertrain

Air Cleaner

4steps
~24min
2/5difficulty
0102030405032N·mlb·ft
Tightening torque found on this page
Done 0 of 4

  1. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
  2. Loosen the clamp and separate the Air Cleaner (ACL) outlet pipe from the ACL assembly.
    • To install, tighten to 3 N·m.
  3. Remove the 2 bolts and the ACL assembly.
    • To install, tighten to 9 N·m.
  4. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.