Ford Focus Quiz
Powertrain

Cylinder Block Distortion

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
~1min read
1special tools
Special Tool(s)
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE:

Refer to the appropriate Section 303-01 for the specification.

  1. NOTE: Use a Straightedge that is calibrated by the manufacturer to be flat within 0.005 mm (0.0002 in) per running foot of length, such as Snap-On® GA438A or equivalent. For example, if the Straightedge is 61 cm (24 in) long, the machined edge must be flat within 0.010 mm (0.0004 in) from end to end.

    Use a Straightedge and a Feeler Gauge Set to inspect the cylinder block for flatness.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.