Ford Focus Quiz
Body

Door - Removal and Installation

In this manual: Body
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
010203040502317N·mlb·ft
Tightening torque found on this page
Done 0 of 4
NOTE:

Front door shown, rear door similar.


Item Part Number Description
1 F5422823 Front door upper hinge-to-door bolts
2 5422800 RH/ 5422801 LH Front door upper hinge
3 W708052 Front door hinge-to-body bolts
4 5422800 RH/ 5422801 LH Front door lower hinge
5 — Front door
6 W710745 Front door lower hinge-to-door bolt

Removal and Installation
  1. Remove the door check arm-to-body bolt.
    • To install, tighten to 23 N·m.
  2. NOTICE: To minimize the possibility of cross threading, hand start all fasteners during the installation. NOTICE: To avoid damaging the door, this step requires an assistant. Mark the position of each hinge and remove the upper and lower hinge-to-door bolts.
    • To install, tighten to 48 N·m.
  3. Remove the front door.
  4. To install, reverse removal procedure.
    • If necessary, align the door. For additional information, refer to Door Alignment — Front or Door Alignment — Rear in this section.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.