Body
Quarter Trim Panel - 2-Door
In this manual: Body
7steps
~42min
2/5difficulty
Done 0 of 7
Removal and Installation
- Remove the C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel in this section.
- Remove the door scuff plate trim panel. For additional information, refer to Scuff Plate Trim Panel in this section.
- Position aside the door weatherstrip.
- Remove the lower anchors and tethers for children and the rear seat backrests. For additional information, refer to Section 501-10.
- Remove the safety belt retractor bezel.
- NOTICE: The quarter trim panel has 2 crash foam blocks that are adhered to it. Care must be taken not to damage the crash foam blocks during removal and installation.
Remove the quarter trim panel.
- Pull the quarter trim panel outward to release the quarter trim panel retaining clips.
- NOTICE: To avoid damage to the quarter trim panel, remove any retaining clips from the body and attach the clips to the quarter trim panel before installing.
To install, reverse the removal procedure.
- To install, make sure to align the trim panel retaining clips to the retaining clip holes in the body.
Test yourself
A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?