Ford Focus Quiz
Powertrain

Transaxle Support Insulator

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
2steps
~12min
1/5difficulty
03060901201507052N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Item Part Number Description
1 W702826 Roll restrictor-to-subframe bolt
2 W702801 Roll restrictor-to-transaxle bracket bolt
3 6P082 Roll restrictor

Removal
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. Remove the 2 bolts and the nut, rotate the bottom of the engine forward enough so the roll restrictor clears the subframe and remove the roll restrictor.
Installation
  1. NOTICE: The roll restrictor bolts are different lengths. If the long bolt is used to hold the roll restrictor to the subframe, damage to the steering rack may occur.

    Position the roll restrictor in place and loosely install the roll restrictor-to-subframe bolt.

  1. Install the roll restrictor-to-transaxle bracket bolt and tighten both of the roll restrictor bolts.
    • Tighten to 70 N·m.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.