Ford Focus Quiz
Powertrain

Transaxle Support Insulator - LH

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
2steps
~22min
3/5difficulty
2special tools
01020304050129N·mlb·ft
Tightening torque found on this page
Done 0 of 2

Special Tool(s)

Adapter for 303-290A 303-290-01
Adapter for 303-290A (Support Leg) 303-290-03A
Support Bar, Engine 303-290A


Item Part Number Description
1 W700069-S Battery tray nut (3 required)
2 10723 Battery tray
3 W703457-S LH transaxle support insulator nut (4 required)
4 W520215-S LH transaxle support insulator nut
5 7M121 LH transaxle support insulator
6 W710090-S PCM/battery support bracket bolt (3 required)
7 6K034 PCM/battery support bracket
8 12A651 PCM
9 W520413-S PCM nut
10 W500614-S PCM bolt
11 W706777-S LH transaxle support insulator bracket bolt (3 required)
12 7M125 LH transaxle support insulator bracket
13 — Resonator bolt (2 required)
14 — Resonator
15 — Intake air hose

  1. Remove the battery. For additional information, refer to Section 414-01.
  2. Release the 2 wiring harness pushpins, then remove the 3 battery tray nuts and the battery tray.
    • To install, tighten to 12 N·m.
  1. Install the Engine Support Bar and Adapters.
  1. Remove the 5 LH transaxle support insulator nuts and the LH transaxle support insulator.
    • To install, tighten the center nut to 150 N·m.
    • To install, tighten the outer nuts to 48 N·m.
  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.