Ford Focus Quiz
Powertrain

Transaxle Support Insulator

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
2steps
~22min
3/5difficulty
2special tools
0204060801004835N·mlb·ft
Tightening torque found on this page
Done 0 of 2
Special Tool(s)
Adapter for 303-290 303-290-01
Adapter for 303-290A (Support Leg) 303-290A-03A
Support Bar, Engine 303-290A

Transaxle Support Insulator
Item Part Number Description
1 W703457 Transaxle support insulator-to-body nuts (4 required)
2 W520215 Transaxle support insulator-to-bracket nut
3 7M121 Transaxle support insulator

Removal
  1. Remove the battery tray. For additional information, refer to Section 414-01.
  2. Install the Engine Support Bar and Adapters and support the engine.
  1. Remove the transaxle support bolt and nuts and remove the transaxle support insulator.
Installation
  1. Install the transaxle support insulator nuts.
    • Install the 4 support insulator-to-body nuts.
      • Tighten to 48 N·m.
    • Install the support insulator-to-bracket nut.
      • Tighten to 150 N·m.
  1. Remove the Engine Support Bar and Adapters.
  1. Install the battery tray. For additional information, refer to Section 414-01.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.