Ford Fusion Quiz
Powertrain

Active Torque Coupling Configuration. General Procedures

In this manual: Powertrain
General Information — 26Chassis — 150Powertrain — 282Electrical — 271Body and Paint — 300
3steps
~18min
2/5difficulty
Done 0 of 3

Configuration

  1. NOTICE: If the ATC (Active Torque Coupling) solenoid pin barcode information is incorrect, the Rear Drive Unit (RDU) may be damaged or handling concerns may occur.

    Using the diagnostic scan tool, select the Powertrain icon on the instrument panel cluster, then select Automatic Traction Control Barcode Entry. Follow the instructions displayed on the diagnostic scan tool.
  2. Enter the 4-digit alphanumeric barcode shown on the label. The scan tool verifies the entered characters and displays a message if the information is invalid.
    Ford Fusion. Active Torque Coupling Configuration. General Procedures
  3. Follow the instructions displayed on the scan tool.

Check

  1. Road test the vehicle. Perform an AWD drive cycle after the Active Torque Coupling (ATC) solenoid barcode information is loaded into the PCM.
    1. Perform 3 accelerations from 0-48 km/h in a straight line.
    • Perform this procedure at low, medium and full accelerator pedal positions.
    • Make sure there is no front wheel slip sensation.
    1. On a dry paved road, drive the vehicle at 8 km/h through a fully locked turn.
    • Make sure the propeller shaft does not bind.

Test yourself

A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.