Chassis
Electronic Parking Brake (EPB) with Manual Release. General Procedures
In this manual: Chassis
6steps
~36min
2/5difficulty
Done 0 of 6
Activation
- Chock the wheels and tires.
- Disconnect the parking brake drive motor electrical connector and, if equipped, remove the wiring retainer.

- Remove the bolts and rotate the parking brake drive motor to remove it.

- Rotate the ball screw drive shaft clockwise 120 degrees.

- Repeat steps 2-4 on the opposite side of the vehicle.
- Install the parking brake drive motors.
REFER to: Parking Brake Drive Motor (206-05 Parking Brake and Actuation, Removal and Installation).
Test yourself
A quick Ford Fusion quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?