Rear Camber Adjustment. General Procedures

Special Service Tools / General Equipment

Wheel Alignment System

Adjustment

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

1. 1
   Using the wheel alignment equipment and the manufacturer's instructions, measure the rear camber.
   Use general equipment: wheel alignment system
2. 2
   Rotate the component counterclockwise (CCW) 2 full turns.
   Torque: 136 lb-ft (185 N·m)

   

3. 3
   Recheck the alignment to verify the camber change, and adjust the rear toe as necessary.
   Refer to: Rear Toe Adjustment (204-00 Suspension System - General Information, General Procedures).