Rear Toe Adjustment. General Procedures

Special Service Tools / General Equipment

Wheel Alignment System

Adjustment

NOTICE: Do not use any tools or equipment to move the wheel and tire assembly or suspension components when checking relative movement. Suspension damage may occur. Using tools or equipment may also create relative movement that may not occur when using hand force. Relative movement must be measured using hand force only.

1. 1
   Using the alignment equipment and the manufacturer's instructions, check the rear toe setting on both sides.
   Use general equipment: Wheel Alignment System
2. 2
   Rotate the component counterclockwise (CCW) 2 full turns.
   Torque: 129 lb-ft (175 N·m)

   

3. 3
   Connect the scan tool and perform the IPMA camera calibration procedure. Follow the scan tool instructions.