Rear Door Removal and Installation

Special Service Tools / General Equipment

Door Check

Removal

1. 1
   Remove the check arm bolt.
   Torque: 18 lb-ft (25 N·m)

   

2. 2
   Disconnect the liftgate electrical connector.

   

3. 3
   Remove the door hinge bolts and the door.
   Use common equipment: door lift
   Torque: 22 lb-ft (30 N·m)

   

Installation

1. 1
   To install, reverse the removal procedure.
2. 2
   Check the alignment and correct if necessary.
   Refer to: Rear Door Alignment (501-03 Body Closures, General Procedures).