Steering Wheel. Removal and Installation

Removal

NOTICE: To avoid damaging the clockspring, make sure the front wheels are in the straight-ahead position.

1. 1
   Remove the driver air bag.
   Refer to: Driver Air Bag (501-20B Supplemental Restraint System, Removal and Installation).
2. 2
   1. Disconnect the electrical connector.

   2. Remove the bolt and the steering wheel.
      Torque: 35 lb-ft (48 N·m)

   

3. 3
   Secure the clockspring rotor to the outer housing so that it does not rotate.

   

Installation

1. To install, reverse the removal procedure.