Appendices
Electromagnetic Compatibility
In this manual: Appendices
~1min read
WARNINGS
- Your vehicle has been tested and certified as compliant with electromagnetic compatibility regulations (72/245/EEC, UN ECE Regulation 10 or any other applicable local regulation). It is your responsibility to ensure that any equipment you have fitted or had fitted complies with the local regulations in force. Have equipment installed by an authorised dealer.
- Only fit radio frequency transmitting equipment, for example a mobile phone or an amateur radio transmitter, that complies with the parameters indicated in the table below. Its installation or use is not subject to any special provisions or conditions.
- Do not mount a transceiver, microphone, loudspeaker or other object in the airbag deployment area.
- Do not attach antenna cables to the vehicle's original wiring, fuel lines or brake lines.
- Keep antenna and power cables at least 10 cm away from any electronic module and airbag.


Note: After fitting radio frequency transmitters, check for possible interference from and to the vehicle's electrical equipment, both in standby and transmitting modes.
Check all electrical equipment:
- With the ignition on.
- When the engine is running.
- During a road test at different speeds.
Check that the electromagnetic fields generated inside the vehicle cabin by the installed transmitter do not exceed the applicable human exposure limits.
Test yourself
A quick Ford Mondeo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?