Ford Mustang Quiz
Engine

Fuel Injectors

In this manual: Engine
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal injury.

WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions can result in personal injury.

1. Remove the supply manifold. For additional information, refer to Supply Manifold in this section.

2. Remove the eight fuel injectors from the supply manifold.

Fuel Injectors

Installation

CAUTION: The retaining clip must be in the upper groove on the injector or the injector can become loose.

1. NOTE: Inspect the two O-rings from each fuel injector. Install new O-rings as needed.

To install, reverse the removal procedure.

Fuel Injectors

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.